The switch under the scoop might need adjusting.

I'd check the switch on the subway below the drop target area. Maybe a broken diode, or switch needs to be less sensitive.

LTG : )

Anybody ever get a response from Jim Thornton about the XL displays and speaker kit from CGC? Email sent weeks ago and no response.

Purchased the Eat at Eddy’s AFM mod and some decals from Mr_Tantrum . Its an amazing mod and better than the original! The light show is fantastic and makes an already incredible game now perfect! Also going to work with Mr Tantrum on playfield plastics for my homebrew project given the quality ease of communication.

624D70E8-C6B0-4450-8701-B57F9551F120 (resized).jpeg

Dose anyone know what switches have to be closed for the ball to register in the far right lane?. I replaced both of the two lower switches and that helped but I still have the issue at times. I know the ball has to travel past certain switches to register. Am I missing one? Thanks... CG Remake

Probably the upper right switching the right lane. I recommend using a magnetic switch. It solved all my issues. Go to the following link: https://pinside.com/pinball/forum/topic/mampm-creations-mrs-catalog

Anyone have a fix:
It doesn't happen all the time bit when the ball lauches there are times that it doesn't make it to the rollover lanes. The ball seems to get caught up under the plastic ramp and then rolls down the right orbit to the playfield.

Make sure your auto launch is hitting the center of the ball. You can adjust the mech from below, even if you have to make the mounting holes a little larger to move left or right a little more.

I'm installing some cliffys, replacing rubbers, and cleaning hard to reach places while I'm at it. I took pics but I'm at a loss as to where this piece goes. I believe it goes somewhere around the right ramp. Anyone know?

PXL_20240427_170649975 (resized).jpg

IMG_0736 (resized).JPG

Thank you!

Be careful tightening those screws. The ramp holes crack VERY easily, I did that to a brand new cow ramp (sigh). I would only lightly snug them with some blue loctite

My biggest issue now is that the ball has a hard time making it up that right ramp. Not sure what's preventing it. I don't know if the ball is rattling around at the bottom, if the ramp is too steep, or both. I've played around with it for the last couple of hours. I noticed a couple things and thought "ahh, this must be the issue" each time only for that not to be the case.

I finally figured out my issue with the right ramp. In case anyone else runs into something similar, make sure that the metal guide on the far side of the ramp entrance goes inside the ramp. When i reassembled everything I accidentally had that guide on the outside so the ball was hitting the ramp plastic and rattling around. What a pain to chase down. I'm an idiot

Has anyone installed Mustang Paul's leg lights on AFMR LE? If so, need recommendations please and thank you!