Quoted from slochar:1n4004 it's printed on the diode. The lamp connector sometimes cracks and needs resoldering.
Thanks Slochar, appreciate that information
We’ll get it unsoldered then and see if replacing them fixes it.
Quoted from slochar:1n4004 it's printed on the diode. The lamp connector sometimes cracks and needs resoldering.
Thanks Slochar, appreciate that information
We’ll get it unsoldered then and see if replacing them fixes it.
Quoted from sullivcd40:Does anyone have a set of plastics? I can’t find them in stock anywhere.
some seem to be available at Ministry but does not seem to be a set
https://www.ministryofpinball.com/en/game-specific-items.html?cat=109
Quoted from sullivcd40:Does anyone have a set of plastics? I can’t find them in stock anywhere.
I have a good bit of a new set. Let me know if you’d like me to take a picture of them to see if I have what you need
Quoted from swinks:I also have all the art if you got desperate to make your own plastics
Awesome!
Quoted from slochar:Need ghost led patch in your rom to reduce/fix this, or led OCD boards.
Wow ok. I'll look around for rom chips that have that. Thank you so much.
Quoted from Johnbeatle:Hello! I just installed LEDs on the ramp and they look great but some of the lights stay on all the time, which didn't happen with the incandescent bulbs. Is this a common thing that happens? Anything I can change to adjust this?
[quoted image]
Do those same LEDs go out when the rest of the LEDs come on? If so, then this is a polarity issue and the LEDs need to be flipped. That or you can purchase one of stumblor CHASE ECHO boards and you won't have to worry about it. https://stumblorpinball.com/products/echo
Okay, my bracket one-way gate that is just above the K-i-s-s shot is busted. I'M pretty sure it's part # A-15661. My web searching has shown its out of stick/discontinued. Anyone have one, or know of a work around? Thanks, this is the one game everyone plays and and not even on the top three scores, so there's two good reasons I need to get it fixed!
Screenshot_20240527_200223_Gallery (resized).jpgSo one section of my ramp lights was out .. I was checking the 12v connectors while I had them on in all lamps test and now none of them work .
The chase lamp board sometimes has a blinking red light , sometimes solid , sometimes off . It’s getting 12v and all the connectors seem solid .
Could the board have gone bad ? Anything to test o to them or try a new one ?
Quoted from Mando:where?
It's on the board. Do you have the manual downloaded from IPDB? It is very helpful for troubleshooting and part look ups.
Quoted from bobwiley:Okay, my bracket one-way gate that is just above the K-i-s-s shot is busted. I'M pretty sure it's part # A-15661. My web searching has shown its out of stick/discontinued. Anyone have one, or know of a work around? Thanks, this is the one game everyone plays and and not even on the top three scores, so there's two good reasons I need to get it fixed!
[quoted image]
If the problem is a broken wire gate, I have used a bicycle spoke to bend a new one, it's the right diameter and holds the bends well. Take the broken gate to a local bike shop and they can scrounge an old spoke for you to use.
Quoted from Fifty:It's on the board. Do you have the manual downloaded from IPDB? It is very helpful for troubleshooting and part look ups.
I do … I don’t see a fuse anywhere on that board unless I am blind ?
Quoted from Deleenhe:If the problem is a broken wire gate, I have used a bicycle spoke to bend a new one, it's the right diameter and holds the bends well. Take the broken gate to a local bike shop and they can scrounge an old spoke for you to use.
Unfortunately it's the bracket that's busted too. Was hoping for an easy fix before I have to get creative.
Quoted from bobwiley:Unfortunately it's the bracket that's busted too. Was hoping for an easy fix before I have to get creative.
A local welding shop can weld stainless steel. I have taken unobtainable parts to get fixed there. Minimal cost.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cftbl-fans-and-members-welcome/page/115 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.